Friday, December 10, 2010

Why Set-up Time is So Important At The Recording Studio

Before bands hit the studio we always advise them to make sure they dial in guitar tones, get fresh strings, and make sure those drums are tuned very well. The number one mistake recording artists make is to not worry about these things and assume that the engineer will "fix it later".

At the All Nighter we will spend as much time as necessary to dial in great drum and guitar tones from the get go, while working on mic placement and signal processing adjustment on our end. Just because you aren't tracking your songs yet doesn't mean that you aren't contributing to the quality of the product. Taking the time to do this is vitally important in determining what the final product will sound like.

Doing things such as drum replacement and guitar amp modeling are last resorts. We want your recording to sound as authentic as possible. The greatest recordings come from the emotion projected from the band and the way in which they express those emotions through their instruments, not some triggered fake drum replacement kit.

So when you come in, be ready to work on getting some great tones from your gear, and I promise you will be glad you did when you receive your mastered cd.

www.allnighterstudio.com

Monday, September 13, 2010

4 reasons we do reference mixing and mastering

A lot of times when bands approach us for mixing and mastering services we ask for a cd, .wav, or mp3 reference to listen to when we are working out the mix or master. For example if a pop punk band comes to us for mixing, we may use a Green Day tune as a listening guide. This is greatly helpful because:

1) It give us a better indication of what you expect to hear out of your final product

2) Words can only describe so much when it comes to music. Merely allowing us to listen to the sound you are going for is worth a thousand words.

3) It puts us on the same page as the client immediately instead of doing multiple mixes and guessing what the client is wanting to hear.

4) It takes the room out of the equation. Even in some of the most expensive high end studios around the world it can be tough to create an absolutely perfect listening environment. Using reference mixing you can eliminate that problem because you are comparing one recording with another on the same studio monitors. A lot of times the mix will sound great in the studio, but poor in the car or home stereo. Reference mixing and mastering helps to eliminate that translation problem.



As Featured On EzineArticles

Thursday, July 29, 2010

The Recording Process

The first question that most bands ask when they come to the All Nighter is "what's the process like?" And usually they follow that up with conveying a previous experience of recording their band one instrument at a time: Drums first, then rhythm guitar(s), then bass, etc... I think it's too bad that most groups have had to "capture the magic" through this process. In fact, it seems almost impossible to capture anything inspirational that way. This is why at The All Nighter we encourage groups to record their foundation tracks live in the studio. We have the capabilities to record a full 5 piece band with complete isolation, which means no bleed from one instrument to the next on the recording.

This does not mean that every member of the group has to nail their part, summoning the precision and grace of an early Beatles session at Abbey Road. Individual punch-ins are not a problem. Each member of the band will be equipped with headphones to hear the full mix. Now, if you are a singer and you have the "I can only sing well when I play my guitar syndrome" (which is all in your head, try strumming a vintage Gibson air guitar and you'll be surprised at the results) no problemo, bring your axe right into the vocal booth with you and go to town.

Of course, before any tracking takes place the band will be honing in guitar and drum tones that appease their highly selective appetites. Focusing also on warming up their fingers and voices in order to lay down a stellar performance.

The whole goal of our suggested process at The All Nighter Studio is to make bands feel comfortable in order to deliver an album worthy performance. We feel the chemistry of a live setup is a great way to lay the foundation of a hit record. Once the heartbeat is achieved, the music can take on a life of it's own!


As Featured On EzineArticles

Monday, July 19, 2010

Studio Pictures posted!



New pictures posted of The All Nighter! Thanks to Rachel Crabtree for taking some terrific shots on Saturday.



Wednesday, July 14, 2010

Recording Studio Thoughts: 10 Recording Tips

Recording Studio Thoughts: 10 Recording Tips: "This being my first blog, I thought I would keep it simple and provide a useful guide for bands to enhance their studio experience. 1) Guit..."

10 Recording Tips

This being my first blog, I thought I would keep it simple and provide a useful guide for bands to enhance their studio experience.

1) Guitar Tuning. Don't assume that you can use the tuner plug in on Pro Tools or that the studio will have a tuner for you. Purchase your own and bring it along. Check your tuning after every song.

2) Speaking of assumption. Don't assume that your engineer will be able to "fix it in the mix" when preparing to record or if you can't perform a part the way you want. Getting the sound from the source is the best way to end up with a great sounding recording

3) Drum Tuning. This should have been #1, but here I am already at #3 and it'd be a lot of work to reverse things. Most so called "crappy" drum kits can sound pretty good if you know how to tune them. If that's not a skill you possess, please learn asap. Also, make sure your heads are decently fresh, and not beaten in backwards.

4) Rehearse your songs to death. If you are not prepared to record a song, my advice would be to not even attempt it. It will turn into a nightmare and maybe even a band ending fight. Stick to the tunes you know. UNLESS you are in a jam band and you need to "just jam man" to get "the kill vibe".

5) Don't say the word "vibe" or "vibes" more than twice during a session. This will drive your engineer crazy.

6) Metronome issues. If you are planning on recording with a metronome, make sure you practice plenty with one or else you may find yourself in a band ending fight.

7) Make sure you are 100% happy with your peformances. Don't let things slide because you can "bury" them in the mix later. When these things start to accumulate it can be pretty noticeable.

8) For dignity's sake, take it easy on the drum replacement software.

9) Only auto tune when necessary

10) No White Castle before the session.